| K8 Technical Specifications |
|
| System Configuration |
|
| Processor |
Octa-core 2.0GHz high-performance processor |
| Operating System |
Android 12.0 (GMS) |
| Memory (ROM+RAM) |
64GB + 4GB (standard) |
| SIM |
Dual Nano SIM card |
| Expansion Slot |
Micro SD card (up to 256 GB) |
| Display Screen |
4-inch, resolution: 800*480 pixels IPS HD Retina Screen |
| Touch Screen |
Industrial capacitive screen, support wet-hand operation/glove
mode/multi-touch/gesture operation |
| Camera |
13 megapixels of rear camera, support auto-focus, 5 megapixels
of front camera |
| Flashlight |
800mA flashlight |
| Keypad |
34 keypads in total: front key*29, side scan key *2, side PTT key
*1, side ±volume key *2 |
| Battery |
3.85V lithium battery, with 6700mAh, detachable, backupbattery support |
| Audio |
Built-in dual microphone ( noise-canceling microphone) |
| Charging Method |
Type-C charging and pin port charging, support 9V/2A, 5V/3A
fast charging |
| Reminder |
High-power speaker/3 sides scan LED reminder/Vibration
reminder/Charging LED reminder |
| Vibrating Motor |
Built-in vibrating motor |
| Sensors |
G-sensor/ Proximity sensor/Light sensor |
|
Intercom Function (Optional)
|
Support one-button PTT calls |
| Structure Parameter |
|
| Dimension (L*W*D) |
205mm*76mm*31mm |
| Weight |
440g (including the battery) |
| Environmental Parameter |
|
Working
Temperature |
-20℃ - 60℃
*Do not charge under low temperature conditions for the safety
Concerns |
Storage
Temperature |
-40℃ - 70℃ |
| Humidity |
0 - 95% (no moisture condensation) |
| Drop Specification |
Multiple drops to concrete floor from the height of 1.5m
(without protective case)
Multiple drops to concrete floor from the height of 1.8m
(with protective case) |
Roller Drop
Specification |
1000 times of roller drops from a height of 0.5 meter |
| Ingress Protection |
IP68 |
| ESD Protection |
±15KV (air discharge), ±8KV (contact discharge) |
| Communication Interface |
|
| USB Interface |
Type-C (with headset function) *1 |
| OTG Interface |
Support |
| Scanning Engine |
|
| Barcode Type |
It can scan one-dimensional / two-dimensional barcodes |
| Scanning Accuracy |
≧3.33mil |
| Scanning Angle |
Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle |
Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance |
8m/s |
| Communication Transmission |
|
WWAN
(Network Frequency) |
China & Eurasian version:
2G：900/1800
3G：WCDMA:B1/B8
4G：FDD-LTE:B1/B3/B7/B8/B20， TDD-LTE:B38/B40
American version:
2G: B2/B3/B5
3G: B1/B2/B4/B5，CDMA&EVDO：BC0/BC1 (U.S.)
4G: B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41 |
WWAN
(Data Service) |
GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO/WCDMA/T
D-SCDMA/TDD-LTE/FDD-LTE |
| WLAN Function |
Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi), support
Wi-Fi 5G PA amplifier |
| Bluetooth |
Bluetooth 5.0, support BLE |
| GPS |
GPS |
| NFC (Standard) |
|
| Working Frequency |
13.56 MHz |
| Reading Distance |
Within 60 mm |
Communication
Protocol |
ISO14443A/14443B/15693 |
| Development Support |
|
Programming
Language |
Java |
| Development API |
iScan API (Scanning Development Kits),
Device API (Device Management/Configuration Development
Kits), Android Standard Interface |
| Development Tool |
Eclipse/Android Studio |
| Accessories (More details in accessories guide) |
|
Standard
Accessories |
USB cable*1, hand strap *1, power adapter*1,device-back
strap*1, battery*1 |
Optional
Accessories |
Single charging cradle, bottom charger, 4-slot charging cradle,
4-slot battery charging cradle, pistol grip, protective case |
