| T1 Technical Specifications |
|
| Processor |
Octa-core 2.0GHz high-performance processor |
| Operating System |
Android 10.0（GMS） |
| Memory (ROM+RAM) |
16GB + 2GB (standard), 64GB + 4GB (optional) |
| SIM |
Two out of three SIM card slots, support dual SIM and dual
standby
* Two out of three SIM card slots: two cards can be held at the
same time, Nano SIM card + Nano SIM card /Nano SIM card +TF
card
Wi-Fi Only：SIM not available |
| Expansion Slot |
Micro SD card (up to 256 GB)
Wi-Fi Only: Expansion slot not available |
| Display Screen |
5.5-inch, resolution: 1440*720 pixels |
| Touch Screen |
Industrial capacitive screen, support wet-hand operation/glove
mode/multi-touch/gesture operation |
| Camera |
13 megapixels of rear camera, 5 megapixels of front camera,
support PDAF |
| Flashlight |
800mA flashlight |
| Keypad |
3 keypads in total: side scan key *2, side power key *1 |
| Battery |
3.85V lithium battery, with 5000mAh, undetachable |
| Audio |
Built-in dual microphone (noise-canceling microphone) |
| Charging Method |
Type-C charging and pin port charging, support 10W fast
charging |
| Reminder |
Vibration reminder/LED reminder/Audio reminder |
Fingerprint
Identification
(Optional) |
Support back fingerprint recognition |
| Vibrating Motor |
Built-in vibrating motor |
| Sensors |
G-sensor/ Proximity sensor/Light sensor |
Intercom Function
(Optional) |
Support one-button PTT calls |
| Structure Parameter |
|
| Dimension (L*W*D) |
157mm*74mm*13.6mm |
| Weight |
230g (including the battery) |
| Environmental Parameter |
|
Working
Temperature |
-20℃ - 60℃
*Do not charge under low temperature conditions for the safety
Concerns |
Storage
Temperature |
-40℃ - 60℃ (without the battery) |
| Humidity |
0 - 95% (no moisture condensation) |
| Drop Specification |
Multiple drops to concrete floor from the height of 1.5m |
| Ingress Protection |
IP65 |
| ESD Protection |
±15KV (air discharge), ±8KV (contact discharge) |
| Accessories (More details in accessories guide) |
|
Standard
Accessories |
USB cable*1, hand strap *1, power adapter*1 |
Optional
Accessories |
Single charging cradle, 4-slot charging cradle, fanny pack,
protective case, protective film |
| Scanning Engine |
|
| Barcode Type |
It can scan one-dimensional / two--dimensional barcodes |
| Scanning Accuracy |
≧3.33mil |
| Scanning Angle |
Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle |
Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance |
8m/s |
| Communication Transmission |
|
WWAN
(Network Frequency) |
2G: B2/B3/B5/B8
3G: WCDMA: B1/B5/B8, CDMA&EVDO: BC0, TD-SCDMA:
B34/B39
4G: FDD-LTE: B1/B3/B5/B7/B8/B20，TDD-LTE:
B34/B38/B39/B40/B41 |
WWAN
(Data Service) |
GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO
/WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE |
| WLAN Function |
Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi), support
Wi-Fi 5G PA amplifier |
| Bluetooth |
Bluetooth 5.0, support BLE |
| GPS |
GPS/AGPS/BDS/Galileo/GLONASS/QZSS |
| NFC (Optional) |
|
| Working Frequency |
13.56 MHz |
| Reading Distance |
Within 30 mm |
| Communication |
|
| Protocol |
ISO14443A/14443B/15693 |
| Development Support |
|
Programming
Language |
Java |
| Development API |
iScan API (Scanning Development Kits),
Device API (Device Management/Configuration Development
Kits), Android Standard Interface |
| Development Tool |
Eclipse/Android Studio |
| Communication Interface |
|
| USB Interface |
Type-C (with headset function) *1 |
| OTG Interface |
Support |
